2025 Annual Report
Annual Report
ECETOC publishes a framework for the risk assessment of plastic additives
Press Release

ECETOC publishes a framework for the risk assessment of plastic additives

Part 1 sets out the fundamental elements, from problem formulation to risk characterisation.Brussels, 22 July 2026. The ECETOC Plastic Additives Task Force has published the first of two peer...
January 2026 news from the Sec Gen
News

January 2026 news from the Sec Gen

Dear colleagues and friends,As we begin a new year, I would like to thank you for your continued engagement and trust in ECETOC. 2026 promises to be an exciting and dynamic year, and I am pleased...
HSSD Tool

HSSD Tool

This software was developed by a consortium of partners to facilitate the uptake of novel approaches to estimate aquatic threshold concentrations (e.g. the concentration at which 5% of the species are exposed above their EC50, HC5).
The Human Exposure Assessment Tools Database (heatDB)

The Human Exposure Assessment Tools Database (heatDB)

heatdb is a public directory of exposure data sources as well as available tools for exposure
NanoApp

NanoApp

ECETOC’s NanoApp is a tool designed to define the boundaries of sets of similar nanoforms and to generate a justification for the REACH registration.
Targeted Risk Assessment (TRA)

Targeted Risk Assessment (TRA)

The Targeted Risk Assessment (TRA) estimates exposures to workers, consumers and the environment that arise during a series of events.
Chronic fish case studies towards an IATA

Chronic fish case studies towards an IATA

Why?Hazard and safety assessments for the pelagic compartment often rely on in vivo studies using a single fish species, raising ethical concerns and uncertainty in terms of extrapolation....
Estimating the environmental release of Synthetic Polymeric Microparticles from Products

Estimating the environmental release of Synthetic Polymeric Microparticles from Products

Why?REACH restriction: SPM use restricted; emissions reporting required by May 2027. Gap: No analytical methods available to measure SPM emissions. Solution: Draft SPERC-based approac...
Case Studies on Reliability and Relevance Considerations during Validation of NAMs

Case Studies on Reliability and Relevance Considerations during Validation of NAMs

Why?Validation of NAMs is often overlooked despite its importance for regulatory use. Traditional validation methods are less suitable for NAMs, which focus on key events rather than apical...
Workshop Report
27.03.2017

Workshop Report 33: Chemical respiratory allergy: clinical information and how to use it and improve it. October 27-28 October 2016, Madrid

The workshop identified various areas that can drive improvements in the identification, classification and risk characterisation of respiratory sensitisers and recommended several practical steps to improve the current situation. Identified problems included the fact that, in contrast to the situation for skin sensitisation and skin irritation, where these are clearly distinguished for the purposes of classification and labelling, no similar distinction is drawn between sensitisation of the respiratory tract and respiratory irritation. Other issues include lack of clarity with respect to minimum reporting requirements, with some concern about isolated cases of respiratory allergy being used for classification, contradictions within the regulations and lack of guidance for clinicians with respect to the data that should be recorded when reporting cases of chemical respiratory allergy. A number of recommendations were made to address these problems.

In a nutshell

Brussels, March 2017

A variety of natural and man-made materials can cause allergic sensitisation of the respiratory tract in susceptible individuals. However, the mechanisms involved in the development of chemical respiratory allergy1 are currently not fully understood and no validated models exist for the identification of chemical respiratory allergens. There are also no methods suitable for the routine assessment of threshold values for sensitisation (the first stage in the development of allergy) of the respiratory tract by chemicals and thus human exposure thresholds are poorly characterised. All this creates great uncertainty surrounding the identification and safe-use of H334 (previously assigned the risk phrase R42) classified substances.

A workshop was therefore held with the two main aims of:

  1. Developing best practice guidance on how to assess and use available human data for the identification of chemical respiratory sensitisers
  2. Driving discussions on identifying human biomarkers for chemical respiratory sensitisation and the use of such tests to identify more accurate human threshold data, which would help refine current risk assessment approaches for the use of such materials, both from occupational and consumer exposure standpoints.

The workshop identified various areas that could drive improvements in the identification, classification and risk characterisation of chemical respiratory sensitisers and recommended several practical steps to improve the current situation, which are captured in the workshop report.

This report will be of interest to academic researchers, occupational health clinicians, industrial toxicologists and regulatory bodies involved in the identification, characterisation, risk assessment and risk management of chemical sensitisers.

1 For the workshop, chemical respiratory allergy was defined as an immune-mediated hypersensitivity reaction to an exogenous low molecular weight chemical resulting in symptoms such as asthma and rhinitis.

Reference

WR 33: Chemical respiratory allergy: clinical information and how to use it and improve it. October 27-28 October 2016, Madrid

Published March 2017
ISSN-2078-7219-33 (online)
D-2017-3001-245