2025 Annual Report
Annual Report
ECETOC publishes a framework for the risk assessment of plastic additives
Press Release

ECETOC publishes a framework for the risk assessment of plastic additives

Part 1 sets out the fundamental elements, from problem formulation to risk characterisation.Brussels, 22 July 2026. The ECETOC Plastic Additives Task Force has published the first of two peer...
January 2026 news from the Sec Gen
News

January 2026 news from the Sec Gen

Dear colleagues and friends,As we begin a new year, I would like to thank you for your continued engagement and trust in ECETOC. 2026 promises to be an exciting and dynamic year, and I am pleased...
HSSD Tool

HSSD Tool

This software was developed by a consortium of partners to facilitate the uptake of novel approaches to estimate aquatic threshold concentrations (e.g. the concentration at which 5% of the species are exposed above their EC50, HC5).
The Human Exposure Assessment Tools Database (heatDB)

The Human Exposure Assessment Tools Database (heatDB)

heatdb is a public directory of exposure data sources as well as available tools for exposure
NanoApp

NanoApp

ECETOC’s NanoApp is a tool designed to define the boundaries of sets of similar nanoforms and to generate a justification for the REACH registration.
Targeted Risk Assessment (TRA)

Targeted Risk Assessment (TRA)

The Targeted Risk Assessment (TRA) estimates exposures to workers, consumers and the environment that arise during a series of events.
TRA Task Force – Worker branch

TRA Task Force – Worker branch

Why? The Worker TRA Task Force has been active since 2019, delivering projects that advance the scientific basis of the Worker Targeted Risk Assessment (TRA) tool. Its overarching objective is to e...
Immunotoxicity assessment: Addressing Challenges and Advancing Methodologies [Workshop → Task Force]​

Immunotoxicity assessment: Addressing Challenges and Advancing Methodologies [Workshop → Task Force]​

Why?Regulatory assessment of immunotoxic properties of chemicals is a complex and challenging task​ Limited regulatory guidance exists​ Lack of industry and regulatory knowledge​...
Chronic fish case studies towards an IATA

Chronic fish case studies towards an IATA

Why?Hazard and safety assessments for the pelagic compartment often rely on in vivo studies using a single fish species, raising ethical concerns and uncertainty in terms of extrapolation....
Article
04.08.1994

Respiratory Allergy: Hazard identification and risk assessment

Respiratory Allergy: Hazard Identification and Risk Assessment. Briatico-Vangosa, G., Braun, C. L. J., Cookman, G., Hofmann, T., Kimber, I., Loveless, S. E., Morrow, T., Pauluhn, J., Sorensen, T., and Niessen, H. J. (1994). Fundam. Appl. Toxicol. 23, 145-158.
Various chemicals and proteins of industrial importance are known to cause respiratory allergy, with occupational asthma being the most important manifestation of the disease. This paper describes clinical syndromes, mechanisms associated with occupational respiratory hypersensitivity, and methods available currently for the prospective identification of potential respiratory allergens. Certain classes of chemicals are commonly associated with occupational respiratory allergy. There is insufficient information, however, to predict respiratory sensitization potential from analysis of structure alone, although reactivity with proteins is likely to be relevant. As yet there exist no fully validated or widely applied predictive methods or internationally harmonized guidelines. The most promising predictive animal methods are the mouse IgE test and guinea pig models. Work in mice has focused upon events occurring during the induction phase of sensitization following primary encounter with the test chemical. In contrast, guinea pig models have been used primarily to identify respiratory allergens (chemicals or proteins) as a function of elicitation reactions induced in previously sensitized animals. Given the possible serious health manifestations of respiratory allergy, early identification of respiratory sensitizers is urgently required. The two methods should, as a priority, be developed further and the production of a detailed protocol for these methods be undertaken to facilitate further validation. Together, this information will allow for two types of risk assessment associated with respiratory allergy: the risk that exposure to a material will (1) induce sensitization in an individual and (2) elicit allergic reactions in a previously sensitized individual.
Reference

Briatico-Vangosa G, Braun CLJ, Cookman G, Hofmann T, Kimber I, Loveless SE, Morrow T, Pauluhn J, Sorensen T, Niessen HJ. 1994.
Respiratory Allergy: Hazard identification and risk assessment.
Fundamental and Applied Toxicology 23(2):145-158
Doi:10.1006/faat.1994.1093
(See also Monograph 19)


Find out more
http://dx.doi.org/10.1006/faat.1994.1093